Contact

Raket - Modelraket - Nieuw/Binnenkort! - Rocket - Rakete

Hier vind je de nieuw(st)e modelraketten en items die verkrijgbaar zijn/komen bij Modelraketten.NL.
Er zijn raketten van Custom Rockets, Estes, Dynastar, Klima, Loc Precision, Quest, Rocketarium, SemRoc, Shrokets en Sky. Er is een ruime keuze aan modelraketten voor beginners en voor de gevorderde modelraket hobbyist. Er zijn enkelvoudig aangedreven raketten, geavanceerde clustermodellen, meertrapsmodellen en (semi)schaalmodellen allemaal verkrijgbaar, als echt lanceerbare raket. Verder zijn er modelraketten met een payload(laadruimte), waar je bijvoorbeeld een hoogtemeter/altimeter, bergingspieper of een mini camera in kunt plaatsen.
Ook verkrijgbaar: Waterraketten van 4M, ROKIT en Klima.
Onderdelen en toebehoren: Bijv. een Cirkelsnijder, Vin Uitlijn Hulpstuk, Hobbymesjes, Schakelaars, Poriënvuller, Montana (sneldrogende) spuitbussen, Balsahout of Lijm.

Modelraketten bouwen en lanceren: voor elke modelbouw hobbyist een mooie uitdaging!
Een leerzame, zeer veelzijdige en spannende hobby.
Terug

Maart 2023Ga hier verder Ga direct naar de Modelraketten.NL WebShop
N E W / N I E U W / N E U
KM-Callisto

Callisto is een van de grote Galilese manen die in een baan om Jupiter draaien.

Dit kleine en lichte raketmodel is relatief eenvoudig en elegant dankzij de naar achteren gepunte en slanke vinnen. De vinnen zijn zeer eenvoudig te monteren. Zelfs met een simpele verflaag maak je van dit model een echte eyecatcher met behulp van de prachtige belettering!

De landing wordt uitgevoerd met de meegeleverde parachute.

Motoren: A6-4, B4-4, C6-7, D9-7.
Diameter: 26mm.
Lengte: 360mm.
Gewicht: 45 gr.

Zie: www.modelraketten.nl --> Shop
N E W / N I E U W / N E U
KM-Cygnus Egg Rocket - Ei-raket De Cygnus-raket is uitgerust met een speciaal laadgedeelte: er past een ei in.

Zo kun je bijvoorbeeld een rauw ei laten vliegen met de raket. Het bovenste ie-gedeelte is met tape vastgeplakt aan het onderste ei-gedeelte. Als het rauwe ei vervolgens de vlucht inclusief landing overleeft, dan is er sprake van een perfecte vlucht. Daarom kun je met deze raket ook wedstrijden houden. Natuurlijk kun je met de raket ook andere payloads vliegen.

Het raketmodel bevat een permanente parachutebescherming (baffle) en heeft geen beschermingswatten nodig.

De vinnen van gefreesd multiplex zijn zeer solide en worden door de voorgestanste buis gestoken. Het Cygnus-embleem maakt het uiterlijk van het model compleet. De landing vindt plaats met behulp van de meegeleverde parachute.

Motoren: C6-5, D9-7(zonder lading), C6-3, D9-5 (met lading).
Diameter: 35mm.
Lengte: 690mm.
Gewicht: 110 gr.

Zie: www.modelraketten.nl --> Shop
N E W / N I E U W / N E U
KM-Calypso-Strarterset

De Calypso, genoemd naar een kleinere maan van Saturnus, wordt geleverd met veel kleurrijke stickers voor de vinnen en grote letters. Dus het ziet er erg aantrekkelijk en opzichtig uit.

Deze raket is ook lid van de Quick & Easy range. Alle staartdelen van de modellen in deze serie kunnen eenvoudig zonder lijm in elkaar worden geklikt en worden verbonden met de rompbuis van de raket. Schilderen is niet nodig - plak gewoon de emblemen op en ga!

De landing wordt uitgevoerd met de meegeleverde parachute.

* Kunststof vinnen/Plastic fins.
* Plastic rode neuskegel/Plastic red nose cone.
* Zelfklevende stickers/Selfsticking Decals.
* Parachute berging/recovery 30cm.

Bijgeleverd/Included:
* Motoren/Motors: 6x B4-4 (90m)
* Aansteeklontjes/Fuses.
* KM Bergingswatten/KM Recovery Wadding.
* Lanceerplatform/Launch Pad.

Motoren: B4-4, C6-5, D9-7.
Diameter: 35mm.
Lengte: 410mm.
Gewicht: 75 gr.

Zie: www.modelraketten.nl --> Shop
N E W / N I E U W / N E U
KM-Equinox

De Equinox is een prachtige modelraket met een ingewikkeld vinontwerp dat uitgebreid is biedt ontwerpmogelijkheden. Afhankelijk van uw voorkeur kunt u de vinbasis schilderen met een kleur en de bovenste en onderste vindelen met een of meer andere kleuren.

Het model bevat een permanente parachutebescherming (baffle) en heeft daarom geen beschermend katoen nodig. De scheiding bij het uitwerpen van de parachute vindt plaats bij het schot. Daarom bevindt de parachute zich in de bovenlichaamsbuis geplaatst.

De vinnen van gefreesd multiplex zijn zeer solide en worden door de voorgestanste buis gestoken. De royale sticker passend bij de raketnaam maakt het uiterlijk van het model compleet. De landing vindt plaats met behulp van de meegeleverde parachute.

Motoren: B4-4, C6-3, D9-5.
Diameter: 35mm.
Lengte: 610mm.
Gewicht: 75 gr.

Zie: www.modelraketten.nl --> Shop
Jan 2023Ga hier verder Ga direct naar de Modelraketten.NL WebShop
N E W / N I E U W / N E U
TSP D20 single use composiet motoren

Motor klasse: D20.
Diameter: 24mm.
Brandtijd: 1 sec.
Max. stuwkracht: 35N.
Gemidd. stuwkracht: 20N.

Samenstelling: composiet.
Afname: per 3 stuks.
Inclusief gloeidraad ontbranders.

Zie: www.modelraketten.nl --> Shop
N E W / N I E U W / N E U
TSP E20 single use composiet motoren

Motor klasse: E20.
Diameter: 24mm.
Brandtijd: 2 sec.
Max. stuwkracht: 35N.
Gemidd. stuwkracht: 20N.
Samenstelling: composiet.
Afname: per 2 stuks.
Inclusief gloeidraad ontbranders.

Zie: www.modelraketten.nl --> Shop
N E W / N I E U W / N E U
TSP F35 single use composiet motoren

Motor klasse: F35.
Diameter: 29mm.
Brandtijd: 2 sec.
Max. stuwkracht: 55N.
Gemidd. stuwkracht: 35N.
Samenstelling: composiet.
Afname: per 2 stuks.
Inclusief gloeidraad ontbranders.

Zie: www.modelraketten.nl --> Shop
Mei 2022Ga hier verder Ga direct naar de Modelraketten.NL WebShop
N E W / N I E U W / N E U
Green Eggs (egg-rocket)

De Green Eggs (egg-rocket) modelraket!

An Egg lofting rocket designed for Estes C11 and D engines. Carrying a regular size raw egg as a payload comes very close to exceeding max lift capability of most C6 engines used in other eggloft kits. Use a C11 engines and you get a safe stable flight and a recovery suited for small sized flying fields.

Clear payload is big enough to carry TWO eggs! (with a D12-3 engine). Swept fins allow the rocket to stand by itself. The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with no awkward stand-off needed. Through the wall thick balsa fins for easier alignment and super strength.

All these features add up to less time building and more time for your students to perform experiments with their -eggstronauts-.
N E W / N I E U W / N E U
LocP AGM-84 SLAM HARPOON (TWT-HARP26)

De LocP AGM-84 SLAM HARPOON (TWT-HARP26) 66mm-HW variation of an AGM-84 Harpoon missile. Sporting the new Modular Motor Can for the widest variety of motor configurations.
Stock with 1x29mm motor tube, it can easily be switched out for any of the available combinations. Using removable rivets you can switch out the configuration at any time.
The cans are cross compatible with any other 66mm MMC(Motor Mount Can) style kits.
Nylon Parachute Recovery.

* Diameter: 2,63 inch ~ 66mm-HW.(HW=Heavy Wall)
* 1x29mm motor mount can, removable.

Zie: AGM-84 SLAM HARPOON
N E W / N I E U W / N E U
LocP AIM-54C Phoenix, 66HW-4x18

De LocP AIM-54C Phoenix (TWT Phoenix) 66mm-HW variation of the notorious AIM-54C Phoenix missile.
Sporting the new Modular Motor Can for the widest variety of motor configurations. Stock with 4x18mm motor tubes (A-D) it can easily be switched out for any of the available combinations. Using removable rivets you can switch out the configuration at any time.
The cans are cross compatible with any other 66mm MMC(Motor Mount Can) style kits.
Nylon Parachute Recovery.

* Diameter: 2,63 inch ~ 66mm-HW.(HW=Heavy Wall)
* 4x18mm motor mount can, removable.

Zie: AIM-54C Phoenix
Maart 2022Ga hier verder Ga direct naar de Modelraketten.NL WebShop
N E W / N I E U W / N E U
TSP L-2 motoren

Te gebruiken als voortstuwing voor vrijvliegende zwever modellen (free flight).
Lage, langdurende stuwkracht.
Plugged type (P).

Motor klasse: B 0,17-P.
Brandtijd: 18 sec.
Max. stuwkracht: 0.4N.
Gemidd. stuwkracht: 0.17N.
Samenstelling: composiet.
Afname: per 8 stuks.
Inclusief lont.

Deze motoren zijn vervangers van de Rapier-motoren met dezelfde eigenschappen, die nu niet meer geproduceerd worden en de beroemde oude Jetex-motoren die sinds de jaren zeventig niet meer bestaan.
Zie ook:
Jetex.org
Modelrockets.NL

Naast de TSP L-2 motoren zijn er ook nog de:
TSP L-1, TSP L-2HP, TSP L-3, TSP L-4 motoren.
Zie: www.modelraketten.nl --> Shop
N E W / N I E U W / N E U
Free Flight Glider
SPARK (ISKRA) Jet Trainer


A laser cut, pre-coloured, profile kit made from balsa wood. It can be enjoyed as a rubber-band-launched glider or as a TSP rocket-powered free-flight glider.

Super simple construction and containing everything you need to build it, this kit is remarkable value for money.

Passend bij: Motoren: TSP L-2HP
N E W / N I E U W / N E U
Free Flight Glider
MiG 19 Jet Fighter Jet Fighter


A laser cut, pre-coloured, profile kit made from balsa wood. It can be enjoyed as a rubber-band-launched glider or as a TSP rocket-powered free-flight glider. Super simple construction and containing everything you need to build it, this kit is remarkable value for money.

Passend bij: Motoren: TSP L-2
N E W / N I E U W / N E U
Free Flight Glider
Saab Gripen Jet Fighter


A laser cut, pre-coloured, profile kit made from balsa wood. It can be enjoyed as a rubber-band-launched glider or as a TSP rocket-powered free-flight glider. Super simple construction and containing everything you need to build it, this kit is remarkable value for money.

Passend bij: Motoren: TSP L-1
Nov. 2018Ga hier verder Ga direct naar de Modelraketten.NL WebShop
Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee
N E W / N I E U W / N E U
Dynastar - Stonebreaker

Kit with GREAT looks and Impressive Size!

Someday in the future, an asteroid or comet may threaten the destruction of the earth. Your urgent mission is to smash the asteroid to bits with the defender missile called the Stonebreaker.

You'll find that the Stonebreaker is more than capable of completing this important mission. But to be safe, you might want to launch two or three of them — just to make sure.

The sleek design and minimum-drag nose cone allow this rocket to achieve fantastic altitudes on inexpensive rocket motors. Or you can put in an F24 motor, and watch it go to hyper-warp speeds.

The new Stonebreaker is a model rocket that is easy to build. If you've built a model rocket before, you'll have no problems building this Skill Level-2 kit. It is straightforward to assemble, and a breeze to decorate.

The body is painted white or a light gray, and the tip of the nose is painted black. All the other decoration is done by applying the colorful self-adhesive decals.

Clusteren? Gebruik:
Centreerring56,3-2x24 (CR2x24_BTE70-mdf), 2x
N E W / N I E U W / N E U
Dynastar - Snarky

The Snarky rocket is a very distinctive rocket kit. It looks more like an airplane than it does a missile. But don't let that fool you. It is fully rocket-powered, and it is big! This unique combination is definitely something that will get you noticed at your next rocket launch.

The Snarky is designed to look like an Air Force target drone. That means its purpose is to mimic the flight of enemy airplanes so that the Air Force can practice intercepting it. But this isn't a scale model. We designed it just for kicks, and to show you how much fun you really can have with model rocketry.

The big reason this is a skill level 2 rocket is that the air scoop is created by slicing and dicing up a body tube. You not only have to trim the ends at an angle, but you have to cut a long section out of it to create a tunnel that is glued to the side of the main fuselage.

The fins are also a bit unusual, as you'll have to build up the shapes out of several smaller pieces. It isn't too hard, and the instructions are well done to provide you the necessary guidance in completing the harder steps.

The paint scheme is actually easy. Paint it all white first, and then nose tip red. Finally, cut out the decals and position them on the model. You'll be surprised how easy it is to end up with a great looking rocket.
N E W / N I E U W / N E U
Dynastar - Sky Torpedo

Huge 66mm diameter tube! Slow lift-off speed that impresses watchers. A favorite of modelers because it is easy to build. Flies on 24mm diameter motors to fantastic heights.

The Sky-Torpedo kit from DynaStar Mid-Power Model Rockets is awesome! Like the other kits from DynaStar Mid-Power Rockets, the Sky-Torpedo is designed to fly on the less expensive D-size black powder rocket motors. And it will give you the same performance as other mid-power kits that require E and F size composite propellant rocket motors. The lighter weight rockets fly faster and higher.

If you've built models before, you'll find that the Sky Torpedo is going to be easy for you. Just because it is big doesn't mean that it is more challenging. It's not. You'll find that the hardest step is painting the rocket. The great thing about this hobby is that you can paint your rockets to any pattern you want; so it can be easy or really detailed and complex. The choice is yours.

Clusteren? Gebruik:
Centreerring66-2x24 (CR2x24_BTE80-mdf), 2x
Centreerring66-4x24 (CR4x24_BTE80-mdf), 2x
N E W / N I E U W / N E U
Dynastar - Rising Star Payloader

Large mid-power kit from DynaStar Mid-Power Model Rockets. Has a large payload bay for your large rocketry projects.

The Rising Star rocket kit from DynaStar Mid-Power Rockets is a beautiful introduction into the realm of mid-size rockets. It is easy to build, uses readily available D and E size rocket motors, and is a real eye-catching model that is sure to get you noticed whenever you launch it.

The big clear-plastic payload bay is what makes this model unique. It is large enough to fit almost any size payload -- even two raw eggs. Of course, you can launch other payloads as well, like an altimeter to measure how high your rocket flies; or launch a strobe light or buzzer to help you locate the rocket once it has landed.

You can even fly non-electronic payloads that are flown just for fun.

While this is a big rocket, it is easy to build: it is only ranked as a skill level two in difficulty. It can be assembled by anyone that has built any other model rocket kit.
N E W / N I E U W / N E U
Rip-Roar (2-stage-gapstaging)

Looking for a LARGE two-stage model rocket? The Rip-Roar is one of our biggest, flying on 24mm diameter motors. It starts its journey skyward by ripping off the pad, and then it roars and roars as that second stage kicks in. You'll love this beast - Simple, but BIG.

The Rip-Roar kit from DynaStar Mid-Power Model Rockets is intended to get you a roaring applause whenever you fly it. When the first stage ignites, it rips its way off the pad and into the sky. But the fun doesn't stop there. Next, the booster stage drops off, and the second stage takes over and continues the roar to astonishing heights.

Finally, when the rocket seems to be just a tiny speck in the sky, the colorful parachute pops out, and the model gently floats back to the ground. Fly it again and again and get the same great applause.

The best feature is that while this is a big model rocket, it is lightweight and can use the inexpensive D-size rocket motors. So you can get big-time fun with little rocket prices.
Nov. 2018Ga hier verder Ga direct naar de Modelraketten.NL WebShop
N E W / N I E U W / N E U
Dynastar - Orion

Let your imagination take a trip to distant worlds. The Orion is the latest corporate star cruiser that will make your journey to other planets fast and full of luxury. This is one of the sleekest looking rockets you'll find, and it is packed full of decals to make it look so realistic. Big too! It is 56mm in diameter and flies on 24mm diameter motors.

And even though it is big, that doesn't mean it is hard to assemble. It is actually an easy to build rocket. For example, the construction step you may spend more time on is assembling the nozzle on the back end of the model — which by most standards is pretty easy. So you'll find yourself flying this model in just a few hours of pleasurable building time
N E W / N I E U W / N E U
Dynastar - LexxJet

This rocket model resembles a business jet that could be the future of luxury corporate travel in the not-so-distant future. It combines the fuel economy of turbofan jet engines, with the raw speed and power of rocket propulsion. It will quickly deliver its passengers to any part of the world in the shortest amount of time.

The DynaStar LexxJet is a trophy rocket that tells everyone you're a master rocketeer and you expect to be going places! Isn't that right?

I'm sure you can imagine the double-takes of your friends when they first see you holding this sleek-looking vehicle. They'll come over to you and say: That is the neatest thing I've seen in a long time. Can I hold it? If you can tolerate that kind of attention, then you'll like owning this rocket. Its stylish shape speaks directly to your subconscious mind and says: Whoa, this one is way cool!

It is not just a display model. The LexxJet is intended to rip open the sky with the authority of a powerful engine. You can just feel it in your chest as this rocket builds up internal chamber pressure. The intensity builds and builds until all of a sudden it quickly accelerates smoothly into the sky on an arrow-straight boost. After coasting upward to it its peak altitude, the colorful parachute is deployed and the jet gently returns to the ground for another spectacular flight.

It takes a bit more finesse to assemble than other rockets.
N E W / N I E U W / N E U
Dynastar - Grappler

Are you looking for a big rocket that you can launch from just about any small launch field? Then the DynaStar Grappler is the perfect rocket for you.

As you can see from the images here, this rocket is very big. It is 114.3 cm tall, and 66mm in diameter. You most certainly will impress the kiddies when you bring this model out to the range because it is that big. They'll all come running up to you and ask when are you going to launch it. That is a guarantee!

While this rocket is big, it is very light weight. It weighs just 284g. empty and well under a pound with a D12-3 engine installed. The reason it is so light is that it is engineered to use thin-wall paper tubes and also uses a brand new BT-80 size plastic nose cone that is also very light for its size.

Even though this rocket is large, that doesn't mean it needs a big field. The rocket flies to about 75 meters on a D12-3 motor. This is a perfect altitude for small fields. Just think how impressive it will be and how much you'll love being able to bring out a big rocket even on a small field.

Clusteren? Gebruik:
Centreerring66-2x24 (CR2x24_BTE80-mdf), 2x
Centreerring66-4x24 (CR4x24_BTE80-mdf), 2x
N E W / N I E U W / N E U
Dynastar - FireFox-SHX

This rocket kit has a shape reminiscent of a Soviet-era fighter jet. The inspiration actually came from the 1982 movie starring Clint Eastwood called FIREFOX. The model is meant to look like a mean and stealthy fighter jet.

The unique trait of this rocket is the offset body tube. Even though the nose is not on the same centerline as the engine tube, the rocket is robust enough that it flies straight and true on D, E, and F size rocket engines.

The Dynastar FireFox-SHX kit was designed by Shrox, who creates some unique designs that can be built using traditional rocket materials. Shrox has always attempted to make kits that don't need a lot of specialty parts. He likes things that can be easily scaled up or down, so modelers can make several different versions of the same kit.

This is a simple-to-build rocket that uses traditional model rocket construction techniques that you may be familiar with from building smaller models.
N E W / N I E U W / N E U
Dynastar - AeroDactyl (2-stage-gapstaging)

The AeroDactyl TS (the T.S. stands for Two-Stage), is a big and bold rocket designed specifically around the Estes 29mm black powder rocket motors. Those motors (the F15 and E16) are low thrust, so you really need a light-weight rocket to use them. That is what the AeroDactyl TS is, a very lightweight rocket.

Most of our newer mid-power kits have gone over to plywood fins because customers wan more durability. But on this rocket, we went old-school and used balsa wood fins to save weight. To increase their strength, we made them through-the-wall.

This is a modern kit, with not only laser-cut fins, but we also laser-cut the slots in the tubes, and vent holes in the centering ring so that this kit becomes much easier to build. We also added pre-cut colorful vinyl decals to the rocket to really enhance the rocket's appearance.

When you fly this prehistoric beast, the rocket lumbers off the launch pad under a huge billowing column of smoke. It is a slow and majestic flight that is sure to please you and the spectators at your next launch.
Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee Dynastar - Apogee


  Ook verkrijgbaar in onze WebShop:
• Waterraket Rokit - Balsa - Poriënvuller - Drukknop
• Magnetic Levitation Sword - Centreerring - Spuitverf
• Hoogtemeters - NoseCone PNC80-Ogive
• Modellen: Saturn-V Skylab / Mercury Redstone
   Antar / Little Joe II / Astrocam / Show Stopper E2X
 
Modelraketten.NL © 2024      KvK-Nr: 50001574      BTW-ID: NL001590630B51