Contact

Modelraketten.NL Forum
Onderwerpen     Onderwerp Toevoegen
Modellen-shop:
Nieuwe Modellen in de Shop
Eerste onderwerp Vorig onderwerp
Volgend onderwerp Laatste onderwerp
Geplaatst door: Modelraketten.NL op 28-05-12 10:31 | E-mail: info(at)modelraketten(punt)nl
Er zijn weer nieuwe modellen toegevoegd aan de webshop.


Het gaat om de:

Stormcaster (slotted tube, C11 of D12-motor)

Phoenix Bird (slotted tube, 18mm motor)

Vector Force (slotted tube, 18mm motor)

Air Commander (two-stage, C11 of D12-motoren)

Pro Series II modellen binnen! | Reactie van: Modelraketten.NL op 14-06-12 10:35 | E-mail: info(at)modelraketten(punt)nl
De Pro Series II modellen van Estes zijn binnen!
Binnenkort te vinden in de webshop.
Bekijk alvast de 'Nieuw/Binnenkort'-pagina op de 'Groundlevel'-pagina.
Nieuwe modellen van Estes | Reactie van: Modelraketten.NL op 28-06-12 11:10 | E-mail: info(at)modelraketten(punt)nl
Er zijn weer nieuwe modellen toegevoegd aan de webshop.
Het gaat om de: Solar Warrior (C11 of D12 motoren), met een imposante, futurisch militaire, dubbele vin configuratie en de Sky Twister met helikopter neuskegel berging en parachute berging voor het model.
Zie onze WebShop voor uitgebreide informatie.

V2 Semi-Scale(C11/D12-motor) | Reactie van: Modelraketten.NL op 06-09-12 11:31 | E-mail: info(at)modelraketten(punt)nl
Sinds deze week is de V2 Semi-Scale (C11 / D12-motor) van Estes verkrijgbaar. Een mooi bouwpakket met flinke diameter, met kunststof neuskegel (langwerpig, in tegenstelling tot de NC-80B) en kunststof staartstukverloop. De vinnen zijn van lasergesneden balsa.

Nieuwe modellen van Semroc | Reactie van: Modelraketten.NL op 22-11-12 16:00 | E-mail: info(at)modelraketten(punt)nl
Er zijn per 17-11-2012 weer nieuwe modellen toegevoegd aan de webshop. Het gaat om de volgende modellen van Semroc:
Omega payload (D-motor, two-stage), Little Ivan, PSC-Infinity (2-cluster / twostage), USS America (C11 / D12-motor), Starship Vega, Cherokee-D-motor.
Per 25-10-2012 was toegevoegd aan de webshop: Tomahawk Cruise Missile - MicroMaxx (Micromodel, te gebruiken met micromotoren)
Nieuwe model Estes | Reactie van: Modelraketten.NL op 15-05-13 18:11 | E-mail: info(at)modelraketten.nl
Nieuw model in de shop van Estes:
De CENTURI modelraket.
***
A multi-finned missile powered by standard engines, the Centuri can reach heights of 180 meter.
***
Parachute recovery brings this awesome rocket back to earth. Pick your own color scheme or go with ours, tried and true rocket colors of days gone by.
***
Recovery is by a 30,5cm preassembled parachute, which returns Centuri to earth for refuelling and that next amazing launch to the stars!
Nieuw model Estes | Reactie van: Modelraketten.NL op 15-05-13 18:12 | E-mail: info(at)modelraketten.nl
Nieuw model in de shop van Estes:
De Air Commander (2-stage, D)
***
De 'Air Commander' is een slank en groot, C11 of D12 motor aangedreven tweetrapsmodel, van ruim 82cm lengte! 'How high can you go?!' Dit model kan flinke hoogten bereiken!
***
Boost je model eerst met een C11-0 of D12-0 motor, om de boel goed van de lanceernaald te laten accelereren. Daarna volgt nog een trap, om echt flink door te trekken!
***
De Air Commander zorgt iedere keer voor een spectaculaire vlucht door het afwerpen van zijn 1e trap en het ontbranden van de krachtige tweede trap. Het sissen van de motoren in de twee trappen blijft lang aanhouden!
Nieuw model Semroc | Reactie van: Modelraketten.NL op 15-05-13 18:14 | E-mail: info(at)modelraketten.nl
Nieuw model Semroc:
De BoostGlider Semroc Swift, 18mm motoren
***
Een boostglider model van Semroc. Uitdagend om te lanceren!
***
De raketbooster komt aan een streamer/wimpel terug naar de grond. De 'glider' zweeft terug.
***
De Semroc Swift Boostglider is een vernieuwde versie van de Centuri Swift Boostglider(1968). Het was de eerste 'pop-pod' boostglider van Centuri. De Swift werd ontworpen voor beginners, zodat deze wat eenvoudiger te bouwen en te 'trimmen' was, voor een stabiele vlucht.
Black Star Voyager-D | Reactie van: Modelraketten.NL op 14-01-14 01:14 | E-mail: info(at)modelraketten.nl
Black Star Voyager-D, Skill level 5!
***
Hands down, the coolest rocket to hit the Estes line this year, the Black Star Voyager can soar to 150m. when powered by an D12 engine. For the serious rocketeer, this is a must have!
***
Sharpen your building skills because when you are finished building this rocket, you will be the envy of the flying field!
***
Length: 100.8 cm.
Diameter: 42 mm.
Estimated Weight: 198.4 gr.
***
Laser cut wood, Waterslide Decals, 46 cm Parachute Recovery.
Recommended Engines: D12-3 (E9-4, E12-4)
Cosmos Mariner-D12 - X-Prize | Reactie van: Modelraketten.NL op 14-01-14 01:15 | E-mail: info(at)modelraketten.nl
Cosmos Mariner-D12, Ansari X-Prize
***
The Estes Cosmos Mariner is a boosted glider version of the sleek X PRIZE rocket plane from the Lone Star Space Access team.
This 1:67 scale rocket plane blasts off 250 feet into the air using a powerful Estes "D" engine.
***
Length: 46 cm.
Diameter: 41.6 mm.
Rotorspan: 34.3 cm.
Weight: 243.6 gr.
Recovery: Glider & 46 cm Parachute
Fins: Laser cut balsa
Maximum Altitude: 122 m.
Recommended Engines: D12-3
Notes: Requires 5 mm. Maxi Rod - sold separately.
Red Flare-D (E2X) - 66mm diam. | Reactie van: Modelraketten.NL op 14-01-14 01:17 | E-mail: info(at)modelraketten.nl
Red Flare-D (E2X)
***
Something new and just a little different has arrived at ESTES:
the Red Flare has a 66mm.
diameter body tube and requires no paint! Being E2X means ALL the parts are pre-colored which means you spend less time building and finishing and more time for flying!
***
Length - 62 cm.
Diameter - 66 mm.
Estimated Weight - 184.3 gr.
***
Plastic fins, self-stick decals, 46 cm parachute recovery.
***
Projected Max Altitude - 305 m.
Recommended Engines: D12-5 (E9-4, E9-6)
AGM-57X Heatseeker (E2X) | Reactie van: Modelraketten.NL op 14-01-14 01:17 | E-mail: info(at)modelraketten.nl
AGM-57X Heatseeker (E2X)
***
The AGM-57X Heatseeker gets you to the flying field quick! No painting is necessary as all parts are pre-colored. Building the Heatseeker is simple and straight forward, which means more time for fun!
***
Length - 47.2 cm.
Diameter - 25 mm.
Estimated Weight - 56.7 gr.
***
Plastic fins, self-stick decals, 30.5 cm parachute recovery.
***
Projected Max Altitude - 312 m.
Recommended Engines: B4-4 (First Flight), B6-4, C6-5
Cosmic Interceptor-51mm diam. | Reactie van: Modelraketten.NL op 14-01-14 01:19 | E-mail: info(at)modelraketten.nl
Cosmic Interceptor
***
Sharpen you building skills before tackling this one. It's sure to be a crowd pleaser.
***
D (and E) Engine powered. One awesome rocket! Standing 103cm tall, this is one impressive rocket on the launch pad and in the air! Sharpen your building skills before tackling this one.
***
Length - 102.9 cm.
Diameter - 51 mm.
Estimated Weight - 286.3 gr.
***
Projected Max Altitude - 190 m.
***
Laser cut wood fins, highly detailed plastic nose cone, waterslide decals, 61 cm nylon parachute recovery.
***
Recommended Engines: D12-3, (E9-4, E12-4, PSII E30-4T)
Top Shot-D (E2X) - 94cm! | Reactie van: Modelraketten.NL op 03-03-14 09:42 | E-mail: info(at)modelraketten.nl
Top Shot-D (E2X=Easy to Fix)
***
Standing 94cm. tall, the Top Shot soars to 200m. when launched on an D12 engine! Keep your eyes open as this one will fly out of sight!
***
All pre-colored plastic parts and a SUPER high flyer! Easy to assemble and no paint is necessary.
***
Length - 94 cm.
Diameter - 42 mm.
Estimated Weight - 150.3 gr.
***
Plastic fins, self-stick decals, 46 cm parachute recovery
***
Projected Max Altitude - 351 m.
Recommended Engines: D12-5 (E9-6, E12-6)
New: Curvilinear (EME) | Reactie van: Modelraketten.NL op 10-08-14 12:28 | E-mail: info(at)modelraketten.nl
De Curvilinear, an easy to build beginner kit, to be launched with Estes Mini Engines (EME).
Small and fat, with a tail ring.
***
The Curvilinear features simple and quick construction.
When powered by the A10-3T mini engine, heights of 175 feet can be reached! Being short keeps this rocket close to the ground for quick recovery.
***
A great addition to your mini engine powered line of rockets. Don't let his low altitude fool you, this is one cool rocket!
***
Recommended Engines: A10-3T
Astron Skydart II, Glider | Reactie van: Modelraketten.NL op 10-08-14 12:29 | E-mail: info(at)modelraketten.nl
De Astron Skydart II Glider.
***
Altitude isn't the key with this kit. While it can reach 500 feet, awesome glider flights are what's so great about the Astron Skydart II.
***
Features parachute and Glider Recovery.
***
Skill Level 3 - Packed with four sheets of lasercut balsa.
***
Powered by standard engines, expect to be impressed with the glider flight of the Astron Skydart II. Absolutely the coolest glider rocket Estes makes, one minute duration glides are fully possible. Be the first on your block to get this cool rocket.
***
Recommended Engines: B6-2 (First Flight), C6-3
The Reflector modelraket | Reactie van: Modelraketten.NL op 07-10-14 10:54 | E-mail: info(at)modelraketten.nl
The Reflector
***
This kit is equipped with a payload section and back-swept fins. Balsa parts for nose cone and conical shoulder. This cool rocket will launch over 228 meter!
***
With its unique shape and squared fin design, this rocket will join a long list of popular Estes payload rockets.
***
The Reflector is easy to build and a perfect choice for the first time payload rocket builder!
***
* Lengte: 508mm.
* Diameter: 33.7mm.
* Gewicht: 60gr.
* Laser gesneden balsa vinnen/Laser cut balsa fins.
* High quality balsa nose cone and conical shoulder.
* Waterslide decals set.
* Parachute (30cm).
* Payload section.
Asteroid Hunter | Reactie van: Modelraketten.NL op 07-10-14 10:55 | E-mail: info(at)modelraketten.nl
Asteroid Hunter
***
The Asteroid Hunter has a unique sci-fi design that will blow you away!
This cool rocket will launch over 150meter!
Estes classified this kit as a Skill Level 5.
***
Not only does the Asteroid Hunter look amazing as it soars through the air, at a skill level 5, the fun begins with it's challenging build! From top to bottom this is one unique rocket. A must have for any collector!
Orange Crush (E2X) | Reactie van: Modelraketten.NL op 07-10-14 10:55 | E-mail: info(at)modelraketten.nl
Orange Crush (E2X)
***
Easy to assemble and no paint is necessary.
High altitude rocket! 830 x 42mm!
***
Easy to assemble and no paint is necessary. High altitude rocket!
***
A couple of hours of your time and you're off to the flying field with the super cool Orange Crush! All parts are pre-colored so there's no need to worry about having to let the paint dry on this rocket. Powered by C11 and D12 engines, the Orange Crush can reach an altitude of about 215 meters!
***
The one nice thing to say about the pre-coloured orange body tube and purple plastic bits is the Orange Crush sure can't hide very well in the tall grass.
***
And did we mention if you like E2X, this is a MUST-HAVE?
Quadcopter Syma X5Camera | Reactie van: Modelraketten.NL op 11-02-15 15:16 | E-mail: info(at)modelraketten.nl
We hebben enkele Quadcopters beschikbaar in onze webshop.
Er wordt een uitgebreid pakket geleverd, met extra propellors en extra batterijen, schroevendraaier, manual en oplaadmogelijkheden, zowel USB als stopcontact, 4Gb Micro USB kaart en Camera. Je vindt deze in de Starterset-rubriek.
De Odyssey modelraket! | Reactie van: Modelraketten.NL op 14-11-15 11:40 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U***
De Odyssey modelraket!
***
De Estes Odyssey is een futuristisch ogende raket aangedreven door 24mm vaste brandstof raket motoren. Samen met Sci-Fi details, is de Odyssey een uitdagende Skill Level 5 bouwpakket. De Odyssey is een "hebbe hebbe hebbe" raket!
***
Zeker de tijd van het bouwen waard, waarna de Odyssey van je lanceerplatform afraast en hoogten kan bereiken van 200 meter op een D12-5 motor.
***
Als je voor wat meer uitdaging zoekt, bij het bouwen van je volgende modelraket, dan moet je deze skill level 5 maar eens even goed bekijken. Berging van de raket is gemakkelijk gemaakt met een kant en klare 46cm kleurrijke parachute. Rompbuis van 34mm, maar achteraan bij het staartstuk 66mm diameter.
Rocket-Powered Dragster Cars | Reactie van: Modelraketten.NL op 14-11-15 11:41 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U***
De Rocket-Powered Blurzz Dragster!
***
EXTREMELY fun rocket cars!***
Very good for school experiments.
2 fun colors, red and blue, are available and scream down the 90 foot rack track and come to a stop with the 6 inch parachute brake! Challenge your friends to a drag race and be the Estes Dragster champion!
***
* Rode of blauwe kleur/Red or blue colour. |
* Parachute berging(15cm)/parachute recovery(15cm). |
* Includes a launch controller. |
* 90 feet of race track. |
* A really cool carrying case.
F117A Fighter Glider | Reactie van: Modelraketten.NL op 14-11-15 11:57 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U***
Lockheed F117A Fighter
Scale - Glider/Zwever, van West Wings.
***
Bouw en vlieg werelds meest begeerde en bijzondere straaljager. De F117A Stealth Fighter is één van de meest futuristische modellen. Het model heeft een indrukwekkend uiterlijk door zijn de strakke beplating en de bijzondere vorm.***
Een schitterend schaalmodel!
***
Length: 585mm. |
Wingspan: 401mm. |
Scale: 1:33. |
Power type: Glider/Rubbermotor.
De Goblin modelraket | Reactie van: Modelraketten.NL op 14-11-15 11:59 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U***
De Goblin modelraket!
***
Estes has brought back another classic model rocket kit. The Estes Goblin first appeared in the early 1970s and has remained a favorite of rocketry modelers through the decades.
***
Over 36 cm. tall and dual streamer recovery-unique for this size rocket. This bird can reach enormous heights! Add it to your collection today!
***
Tackle your greatest fears with the Goblin! Although a Skill Level 2 kit, it is actually pretty simple to assemble. Precision laser cut wood fins. High quality body tube. Plastic nose cone. Impressive waterslide decals. All stacks up to being one great rocket! And a blast from the past no less.
Make-It, Take-It beginnermodel | Reactie van: Modelraketten.NL op 14-11-15 12:01 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U***
De Make-It, Take-It is een prima beginners model.
***
Dit model is zeer gemakkelijk te bouwen en laat je op een eenvoudige wijze, je eerste lancering beleven.
Alle delen zijn voorgekleurd(rood/wit/blauw), wat inhoud dat verven niet nodig is. Voor de samenstelling zijn alleen een schaar/mesje en lijm nodig.
Ideaal voor beginners, schoolproject, club of scouting.
***
Aanbevolen wordt om de eerste vluchten te beginnen met een A of B motor.
***
* Kunststof vinset(rood), uit één stuk/One piece plastic tail(red). |
* Kunststof neuskegel(blauw)/Plastic nose cone(blue). |
* Witte voorgekleurde rompbuis/White, pre-coloured body tube. |
* Drukgevoelige stickerset(3 kleuren)/Pressure sensitive decals(3 colours). |
* Parachute (30cm). |
* Géén verdere afwerking nodig/No extra finishing needed.
De SLV modelraket | Reactie van: Modelraketten.NL op 14-11-15 12:02 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U***
De SLV modelraket
***
De Estes SLV is een futuristisch ogende raket aangedreven door 24mm vaste brandstof raket motoren. Samen met Sci-Fi details, is de SLV een uitdagende Skill Level 4 bouwpakket. De SLV is een "hebbe hebbe hebbe" raket! Zeker de tijd van het bouwen waard, waarna de SLV van je lanceerplatform afraast en hoogten kan bereiken van 185 meter op een D12-5 motor.
***
Als je voor wat meer uitdaging zoekt, bij het bouwen van je volgende modelraket, dan moet je deze skill level 4 maar eens even goed bekijken. Berging van de raket is gemakkelijk gemaakt met een kant en klare 46cm kleurrijke parachute. Rompbuis van 34mm diameter.
***
Constructing a Skill Level 4 model rocket kit can be time consuming and requires attention to detail. The kit may take several hours to build and often involve detailed paint schemes. Although Skill Level 4 rocket kits may be challenging and take a good amount of time, the finished product is worth the wait.
Little Joe II (scale) - SOON ! | Reactie van: Modelraketten.NL op 08-12-15 20:08 | E-mail: info(at)modelraketten.nl
Little Joe II (scale)
***
Reintroduced with a lot of scale detail!
***
The scale kit introductions get another BIG boost with the reintroduction of the Little Joe II. This kit is a 1/45th scale and a skill level 4 builder at it´s finest! Our high quality parts along with your precision building and finishing skills will make the Little Joe II a rocket to be very proud of!
***
We´ve also included a historical brochure for your reading enjoyment! But until you can buy the kit and for a quick history lesson, the Little Joe II was used to test the Apollo Capsule used on the Saturn V that took man to the moon.
M320 scale like rocket | Reactie van: Modelraketten.NL op 03-01-16 11:19 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U
M320 scale like rocket

De M320 scale like rocket is een mooi beginners model van Custom Rockets. Eenvoudig te bouwen en vliegen.

Aanbevolen wordt om de eerste vluchten te beginnen met een A of B motor. Vluchten tot 330meter zijn mogelijk met een C6-7 motor.
Aantekening:
* Voorgestanste balsahouten vinnen.
* Kunststof neuskegel/Plastic nose cone.
* Druk gevoeligege stickerset/Pressure-sensitive decals.
* Streamer bijgeleverd.
* Snel-ontkoppel systeem voor de motor/Quick-release engine mount.
Aanbevolen Motoren: A8-3, A6-4, B4-4, B6-4, C6-5, C6-7
Mini Fat Boy | Reactie van: Modelraketten.NL op 03-01-16 11:22 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U
Mini Fat Boy

De Mini Fat Boy mini motor aangedreven modelraket.

Dit mini motor aangedreven, korte en dikke model geeft je een hoop plezier!
Een eenvoudige constructie zorgt ervoor dat je snel aan het lanceren kunt! De maximale hoogte is ongeveer 70m.
***
A must have addition to your collection of mini motor powered rockets. Aantekening:
* Laser gesneden balsahouten vinnen.
* Kunststof neuskegel.
* Water-slide decals(stickers).
* 30,5cm parachute.
Aanbevolen Motoren: A10-3T
Honest John - scale | Reactie van: Modelraketten.NL op 15-06-16 23:27 | E-mail: info@modelraketten.nl
A 1/14 scale model rocket kit thats sure to be a collectors item! 
High quality parts you have come to know with Estes kits. 

A highly sought after scale kit has returned to Estes! 
You asked and we listened. More scale kits and this is just the beginning. The 1/14 scale surface-to-surface missile has kick off the launch pad and is a very high flying rocket! You can expect around 420 meters of HIGH altitude with the Honest John, when powered by an E12-6 (170meters on a D12). 

You will be pleased with the high quality parts in this kit and it needs to be a part of your collection.

Aanbevolen Motoren: C11-3, D12-5, E12-6

Special nose cone. Special fins.
De Aldebaran van Klima | Reactie van: Modelraketten.NL op 07-08-16 19:38 | E-mail: info(at)modelraketten.nl
De Aldebaran van fabrikant Klima is een koninklijke ster in het sterrenbeeld Stier, die zeer goed bij een modelraket van deze grootte past.
***
De Aldebaran is een mooi en verdraaglijk model met een klassiek uiterlijk die ook zeer gemakkelijk op te bouwen is. De vinnen zijn gefreesd uit solide multiplex en kunnen zeer gemakkelijk worden gelijmd aan de rompbuis, dankzij de door-de-wand verbinding. Dit model is daardoor prima geschikt voor beginners die graag een wat groter model willen proberen.
***
Een mooie grote naamsticker, evenals een geblokte rompbuis omvattende sticker is bijgeleverd. Deze zorgen beide voor een mooi en snel afgewerkt uiterlijk!
***
Een geschikte parachute is uiteraard inbegrepen.
***
Lengte: 545mm.
Diameter: 35mm.
Gewicht: 80gr.
***
Aanbevolen Motoren:
B4-4, C6-5, D9-7
De SIRIUS van Klima | Reactie van: Modelraketten.NL op 07-08-16 19:39 | E-mail: info(at)modelraketten.nl
De SIRIUS van fabrikant Klima herinnert aan de klassieke design fantasie modellen van vroeger, of hoe ze hadden kunnen zijn.
***
Vernoemd naar de helderste ster in sterrenbeeld de grote hond, is de Sirius voorzien van veel gedetailleerde stickers, die popnagels, leidingen en een luik voorstellen, enz...
***
De vinnen zijn gefreesd uit solide multiplex en kunnen zeer gemakkelijk worden gelijmd aan de rompbuis, dankzij de door-de-wand verbinding. Dit model is daardoor prima geschikt voor beginners die graag een wat groter model willen proberen.
***
Een echt mooi model voor de ambitieuze raket vlieger!
***
Een parachute voor veilige terugkeer is uiteraard inbegrepen.
***
Lengte: 495mm.
Diameter: 35mm.
Gewicht: 80gr.
***
Aanbevolen Motoren:
B4-4, C6-5, D9-7
Quinstar UFO | Reactie van: Modelraketten.NL op 31-08-16 16:35 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U *** Quinstar UFO - A 20cm diameter spinning UFO rocket! Futuristic and sci-fi! Low altitude flights for assured recovery!
***
This is a crowd pleaser for sure! Quin, as in five, precision laser cut wood pieces build into one very unique and fun flying rocket! It spins going up and it spins coming down! Even more fun is no nose cone so truly looks like a UFO.
***
* UFO model.
* Laser cut balsa parts.
* 20cm doorsnede/diameter!
* Waterslide Decals.
* Helikopter berging/Helicopter recovery.
Estes Saturn V | Reactie van: Modelraketten.NL op 20-12-16 21:58 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U
Probably available before the end of this week:
***
The mighty Saturn V from Estes!
One of the most imaginative models.
Ten cm. in diameter and more than one meter in length!
Fly it on an Estes D-motor. Or even better, challenge yourself, rebuild it a bit and make it a D-cluster model, flying on two or three 24mm. D-motors!
We will try to provide cluster centering rings and needed accessories, as soon as possible.
Estes Shuttle (new) | Reactie van: Modelraketten.NL op 20-12-16 22:07 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U
Probably available before the end of this week:
***
The new Estes Shuttle!
With a length of nearly 60cm. and a diameter of 66mm, a true rocketeers choice!
The Shuttle itself measures about 37x22cm.
Multiple booster pods.
Nike Apache, Airb. Surv. Miss. | Reactie van: Modelraketten.NL op 30-05-17 14:15 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

De Airborne Surveillance Missile(mini motor, 13mm)
en de
Nike Apache(standaard motor, 18mm)
zijn toegevoegd aan onze webshop.

Dit zijn interessante en mooie modellen, voor een lage prijs.
Estes Sky Cruiser (E2X) | Reactie van: Modelraketten.NL op 07-07-17 11:54 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Estes Sky Cruiser (E2X)
Black and white and pretty retro!
Cruise to amazing heights with the Sky Cruiser. Powered by standard Estes engines, watch this rocket reach 300meters!

No painting is necessary as all parts are pre-colored and ready to assemble.

Aantekening:
* Plastic parts.
* Two fin sets.
* Conical shoulder.
* Decals: Self-Stick.
* 30,5cm Parachute Recovery.
Firebolt (E2X) | Reactie van: Modelraketten.NL op 07-07-17 11:55 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Estes Firebolt (E2X)
Super bright in the sky and what a sight it is as the Firebolt is an amazing 93cm tall!
A large clear payload section makes launching just about anything into orbit a breeze.

Being E2X assembly just makes this kit that much more fun!
Easy to assemble: Pre-coloured parts, glue parts together as instructed, apply the self-stick decals and attach the recovery system.

You are ready for lauch!
Aantekening:
* Plastic parts.
* Decals: Self-Stick.
* 45cm Parachute Recovery.
Nike Apache (scale) | Reactie van: Modelraketten.NL op 07-07-17 12:00 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Estes Nike Apache (1/12.5 scale)
It is here! A 1/12.45th scale model rocket kit that is sure to be a collectors item! A true classic!

Another classic kit has returned to the Estes line! And did we mention it is a scale kit? While some scale kits are quite the challenge to build, the Nike Apache is not!

A skill level 1 kit, that is were beginners start and become expert builders! A fairly lightweight rocket combined with an Estes C engine, you can expect some amazing altitude out of this one!

Aantekening:
* Easy to build.
* Laser cut Wood Fins, 8x.
* Conical shoulder.
* Waterslide Decal.
* 30,5cm. Parachute Recovery.
* Projected Max Altitude: 282m.
Nike Smoke (1/10 scale) | Reactie van: Modelraketten.NL op 07-07-17 12:02 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Estes Nike Smoke (1/10 scale)
Een 1/10 schaalmodel bouwpakket, dat zeker een verzamelaars item is! De onderdelen zijn van hoge kwaliteit zoals je hebt leren kennen van de Estes bouwpakketten.

De schaalmodel vloot blijft groeien!
Weer een zeer gewild schaalmodel, dat is teruggekeerd naar Estes! De Nike Smoke is een 1/10 schaalmodel en is eigenlijk vrij eenvoudig te bouwen. Met een geschat gewicht van 65gram, kun je een hoogte verwachten van ongeveer 160 meter. Met een Klima D9-motor, zelfs tegen de 300 meter hoogte!

Weer een Estes bouwpakket van hoge kwaliteit, welke gewoon ligt te wachten om te worden toegevoegd aan je raketvloot!

Aantekening:
* Vrij eenvoudig te bouwen / Pretty straight build.
* Laser gesneden houten vinnen / Laser cut Wood Fins.
* Waterslide Decals.
* Parachute berging / Recovery 38cm.
* Maximaal te bereiken hoogte: / Projected Max Altitude: 300m.
Sky Warrior | Reactie van: Modelraketten.NL op 07-07-17 12:03 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Estes Sky Warrior
Standard engine powered. Unique fins with legs. A great addition to your line of rockets.

Take to the skies with the Sky Warrior and watch this rocket climb over 250 meters when launched on a C6-5 engine. Three finned and unique styling, keep an eye on the Sky Warrior as the 30,5cm parachute brings this awesome rocket back to earth.

Aantekening:
* Balsa nose cone.
* Laser cut Wood Fins.
* Decals: Waterslide.
* Legged fins.
* 30,5cm Parachute Recovery.
SR-Cherokee-D | Reactie van: Modelraketten.NL op 07-07-17 12:05 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Semroc SR-Cherokee-D
The original Astron Cherokee-D was designed by Gene Street when he was the Chief Illustrator at Estes Industries. The original model was designed to use the new D-power engines. The original underwent several changes over the years. The main body tube was lengthened to 18inch and the balsa nose cone was replaced with a plastic equivalent. It was released in late 1969 as Catalog Number 694-K-47.

The Semroc Retro-Repro Cherokee-D is very close to the original. The die-cut fins are replaced with more accurate laser-cut fins. The original tube length and balsa nose cone are used. The original rubber shock cord is replaced with an elastic cord for longer life along with a Kevlar cord for greater reliability.

This classic designed model is 18mm or D-powered with a convertible engine-mount.

Het model is eenvoudig te bouwen.

Aantekening:
* Klassiek ontwerp.
* Converteerbare motorhouder. Vliegt zowel op 18 als 24mm motoren!
* Balsahouten neuskegel.
* Laser gesneden balsahouten vinnen.
* Spanwijdte vinnen: 15,5cm.
* Eén 30cm 2-kleurige parachute.
* Prachtige Water slide decals.
SR-Taurus | Reactie van: Modelraketten.NL op 07-07-17 12:07 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Semroc SR-Taurus
Lots of transitions, tubes, cones, and a spiffy paint job, it is a cool and futuristic bird. The original Centuri Taurus Fleet Ship was initially released in 1972. It was designed to look like an alien planetary cruiser from the far away planet of Taurus. A short science fiction history was provided with the kit.

Using six plastic cones and reducers, the Taurus was one of the first entries taking advantage of the less expensive balsa replacements in the transition from balsa to plastic in the early 1970s.

The Semroc Taurus is a modern recreation of the original. It uses all balsa parts instead of the plastic parts provided in the early model. Laser-cut balsa fins are included instead of the original die-cut parts. A slightly smaller chute is provided since the model is much lighter due to the use of balsa instead of plastic. A Kevlar cord is provided for better shock cord retention.

Aantekening:
* Precision Turned Balsa Nose Cones and transitions.
* Laser Cut Balsa Fins.
* Water Slide Decals.
* 30cm Parachute Recovery.
* Spanwijdte vinnen / Fin Span 168mm.
SR-Saturnus-1B (scale) | Reactie van: Modelraketten.NL op 07-07-17 12:10 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

De machtige Saturnus-1B mag natuurlijk niet ontbreken in het assortiment van de échte raket modelbouwer! Bijna één meter lengte met een giga doorsnede van 10cm. Het model is een Semroc 1/70 schaal van het origineel. Bouw deze machtige Saturnus-1B met een viermotorig cluster(C6-3 of 2xD9-3/2xC6-P) of één enkele zwaardere motor(D12-3).

De 1B werd voor het eerst uitgebracht in 1967. Meer dan één jaar ontwikkeling ging eraan vooraf. Het model was en is een groot staaltje vakmanschap in de raketmodelbouw hobby. Een zeer dichte benadering van een schaalmodel en het heeft de tand des tijds glansrijk doorstaan. Een echt modelbouw pakket voor de bouwers die de kunst goed in de vingers hebben. Het pakket laat vooral zien wat de bouwer ervan maakt, in plaats van wat de producent geleverd heeft, want hier valt wel wat aan te bouwen.

Dit Semroc Saturnus-1B pakket is een trouwe kopie van het origineel. Er worden laser gesneden onderdelen geleverd en glad afgewerkte balshouten onderdelen voor het bouwgemak. Zware reliëf omhulsels, met een glad oppervlak voor een makkelijke afwerking, worden bijgeleverd. Er wordt gebruik gemaakt van een 81cm parachute.

Fly your Saturn today!
Een must have voor de gevorderde master raketmodelbouwer!

Aantekening:
* Met laser gesneden balsahouten vinnen.
* Vin spanwijdte: 20,8cm.
* Balsahouten neuskegel.
* Veel onderdelen, 18 verschillende stukken rompbuis.
* Vliegt op een cluster van C of één enkele D motor.
* Eén 810mm parachute.
* Prachtige Water slide decalset bijgevoegd.
* Enkeltraps. Semroc SR-Saturnus-1B (scale C/D-motor)
SR-Starship Vega | Reactie van: Modelraketten.NL op 07-07-17 12:16 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

Semroc SR-Starship Vega
The original Starship Vega was designed by Wayne Kellner at Estes Industries. It was released as a futuristic planetary exploration vehicle in the style of illustrations by Frank Tinsley in the 1950s. It was first offered in the 1971 Citation Catalog as Catalog Number MK-4. The number was changed to KC-4 and was offered for a short time in the 1973 and 1974 catalogs. A simplified version was re-released in 1979 as Catalog Number 1320.

The Semroc Retro-Repro Starship Vega is very close in design to the original. Precision laser-cut fins and rings make the assembly easier. The addition of a Kevlar shock cord mount increases reliability. A large full-color waterslide decal sheet adds the finishing touches. This classic designed model is 18mm engine powered.

Aantekening:
* Klassiek ontwerp.
* Balsahouten neuskegel.
* Laser gesneden balsahouten vinnen.
* Spanwijdte vinnen: 22,9cm.
* Eén 30cm 2-kleurige parachute.
* Prachtige Water slide decals.
KM - Altair modelraket, 1295mm | Reactie van: Modelraketten.NL op 17-07-17 12:17 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

De KM - Altair modelraket

Model Gegevens:
Lengte: 1295mm.
Diameter: 35mm.
Gewicht: 120gr.

De zeer lange Altair modelraket is een prachtige Super Roc met klassieke retro stijl!

Zeer lang, maar toch superlicht. Het model is uitgerust met een duurzame parachute bescherming(baffle) en heeft geen watten, voor de berging daarvan, nodig.

Omdat de scheiding bij de uitstoot, aan het bovenste 1/3 deel van de rompbuis plaatsvindt, is er meteen een grote laadruimte aanwezig! (hoogtemeter, etc.)

De multiplex vinnen worden door de buis gestoken en vastgezet en hoeven vervolgens alleen nog te worden uitgelijnd. De grote stickers zorgen voor een mooie afwerking van het model.

De landing wordt uitgevoerd met de meegeleverde parachute.
Aantekening:
* Triplex voorgesneden vinnen/Plywood precut fins.
* Plastic neuskegel/Plastic nose cone.
* Zelfklevende stickers/Selfsticking Decals.
* Parachute berging/recovery.
KM - Andromeda raket, 805mm | Reactie van: Modelraketten.NL op 17-07-17 12:22 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

De KM - Andromeda modelraket

Model Gegevens:
Lengte: 805mm.
Diameter: 50mm.
Gewicht: 215gr.

Deze raket heeft een 4-cluster en kan worden gevlogen met een uitgebreide lijst van motor combinaties.
Vanwege het lage gewicht kan dat al heel voordelig met B-motoren en wordt een mooie kolom van rook in de lucht achter gelaten tijdens de start.

De gefreesde 4-cluster motorsteun zet de motoren vast met behulp van een roestvrijstalen schroef en past nauwkeurig in de rompbuis.
De multiplex vinnen worden door de buis gestoken en vastgelijmd en zijn vervolgens meteen uitgelijnd.

Het model is uitgerust met een duurzame parachute bescherming(baffle) en heeft geen watten, voor de berging daarvan, nodig. De scheiding, bij de uitstoot, vindt in het midden van de rompbuis plaats, net boven de baffle.

De grote stickers, met sterrenstelsel, zorgen voor een mooie afwerking van het model.

De landing wordt uitgevoerd met de meegeleverde 55cm nylon parachute. Al met al een kwalitatief hoogwaardige kit voor een zeer aantrekkelijke prijs!
Aantekening:
* Triplex voorgesneden vinnen/Plywood precut fins.
* Plastic neuskegel/Plastic nose cone.
* Zelfklevende stickers/Selfsticking Decals.
* Parachute berging/recovery, nylon 55cm.

Motoren:
4xB4-4 (155m / eerste vlucht).
2xB4-4 + 2xC6-P (250m).
2xC6-7 + 2xC6-P (350m).
2xC6-P + 2xD9-7 (450m).
KM - Solar Flare, 1520mm | Reactie van: Modelraketten.NL op 17-07-17 12:25 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U

De KM - Solar Flare modelraket

Aanbevolen Motoren:
4xB4-4,
2xC6-5 + 2xC6-P,
2xC6-P + 2xD9-5,
2xD9-7 + 2xD9-P (470m)

De Solar Flare is de enige Super Roc met een cluster op de markt! Met een totale lengte van meer dan 1,50m. en een cluster van 4, kun je echt de aandacht trekken!
Deze raket met 4-cluster kan worden gevlogen met een uitgebreide lijst van motor combinaties.
Vanwege het lage gewicht kan dat al heel voordelig met B-motoren en wordt een mooie kolom van rook in de lucht achter gelaten tijdens de start.

De gefreesde 4-cluster motorsteun zet de motoren vast met behulp van een roestvrijstalen schroef en past nauwkeurig in de rompbuis.
Een zeer eenvoudige en snelle montage van de plastic vinnen die zijn gemaakt van onze beproefde ABS.

Het model is uitgerust met een duurzame parachute bescherming(baffle) en heeft geen watten, voor de berging daarvan, nodig. De scheiding, bij de uitstoot, vindt in het midden van de rompbuis plaats, net boven de baffle. Daarnaast kan het bovenste gedeelte van de buis ook functioneren als een grote laadruimte.

De grote stickers, met naam en vlammen, zorgen voor een mooie afwerking van het model.

De landing wordt uitgevoerd met de meegeleverde 55cm nylon parachute. Al met al, een kit voor de echte raketgekken tegen een goede prijs!

Aantekening:
* Kunststof staartstuk/Plastic fins.
* Plastic neuskegel/Plastic nose cone.
* Zelfklevende stickers/Selfsticking Decals.
* Parachute berging/recovery, nylon 55cm.
Estes Executioner is back! | Reactie van: Modelraketten.NL op 09-12-17 11:44 | E-mail: info@modelraketten.nl
De Executioner is back again!

Dominate the skies with the massive Estes Executioner!
This is what a rocket should look like - large and in charge!
This giant is impossible to miss during flight with its huge 66mm diameter body tube and nearly a metre in length.

Een groot, lang, D of E-motor aangedreven model! Eén van de zwaardere modellen en zeker met een imposante lengte! Het model kan een hoogte bereiken van 100m op een D12 motor en ook nog met een E motor vliegen.

Het model is toegerust met slotted fins om grote krachten te kunnen weerstaan. De vinnen worden door de rompbuis heen op het motorhuis gelijmd voor extra stevigheid. De slots(gleuven) zijn al voorgesneden. Een must have voor de gevorderde raketmodelbouwer!

Uitdagende uitbreidingen:
Motorhuis cluster BT-80 2x24mm(MM80-24-2)
Motorhuis cluster BT-80 3x24mm(MM80-24-3)
Motorhuis cluster BT-80 4x18mm(MM80-18-4)
Motorhuis cluster BT-80 4x24mm(MM80-24-4)

Aantekening:
* Diameter: 66mm.
* Plastic nose cone.
* Parachute Recovery, 610mm.
Estes Protostar | Reactie van: Modelraketten.NL op 09-12-17 11:50 | E-mail: info(at)modelraketten.nl
Estes Protostar

This is the Protostar 61cm rocket kit from Estes. Featuring one of Estes most unique designs yet, this super cool rocket will get your building juices flowing.

Retro style and futuristic in one. This model flies on 24mm C11, D12, and E12 motors. Add its furturistic design to your space fleet.

61cm in length and weighing 142 grams, this spaceship is the perfect addition to any model rocket collection!

Aantekening:
* Plastic nose cones 4x.
* Laser cut wood and plastic(cone) fins.
* Detailed Waterslide Decals.
* 46cm. Parachute Recovery.
* Projected Max Altitude: 400m.
* 5mm Launch Rod required.
Estes Starship Nova | Reactie van: Modelraketten.NL op 09-12-17 11:51 | E-mail: info(at)modelraketten.nl
Starship Nova

A straight forward but very nice build that will look great on the launch pad and in the sky. You ask and we listen! Here is another highly sought after bring back from years gone by. Missed the Starship Nova the first time around? Well guess what? You are in luck now!

Only slight build modifications from the original rocket, you wont be disappointed. A very nice design and standard engine powered to launch.

It was a HUGE hit the first time around and is sure to be a collectors item this time around!

Aantekening:
* Easy to build.
* Plastic nose cone.
* Laser cut paper parts.
* Laser cut wood fins.
* Waterslide Decal.
* 38cm. Parachute Recovery.
* Projected Max Altitude: 152m.
Estes Nike-X (scale-like) | Reactie van: Modelraketten.NL op 09-12-17 11:56 | E-mail: info(at)modelraketten.nl
Nike-X (scale-like)

Standard engine powered and impressive on the launch pad! A must-have rocket to be added to your collection!

You asked and we listened!
Another highly sought after kit is rejoining the Estes line!
The Nike-X single stage rocket is a scale-like model of the armys 4th generation, two-stage surface-to-air interceptor missile.
Nike-style design with army décor including high quality realistic roll pattern waterslide decals. Great performance and really impressive flights.

Aantekening:
* Easy to build.
* Plastic nose cone.
* Laser cut wood fins, 12x.
* Waterslide Decal.
* 38cm. Parachute Recovery
* Projected Max Altitude: 183m.
De Flicker Starterset | Reactie van: Modelraketten.NL op 09-12-17 11:59 | E-mail: info(at)modelraketten.nl
De Flicker Starterset

LIGHTS, CAMERA, ACTION! Well almost. LIGHTS anyway! The Flicker is new and unique to Estes in that the nose cone lights up! Bright LEDs light up the sky!

De Flicker Starterset is een mooi pakket om met deze hobby te starten. In dit pakket zit het model, samen met een lanceerplatform en lanceerbediening van Estes.
Incl. 3 motoren, 3 ontbranders en bergingswatten.

Dit model is zeer eenvoudig te bouwen en te lanceren. Verven is overbodig!
Vluchten tot 200meter zijn mogelijk met een C6-5 motor.

Aantekening:
* E2X: Easy to Fix Flicker modelraket, met staartstuk van kunststof(plastic lijm nodig/plastic glue needed).
* Compleet lanceersysteem/Complete launch system:
- Lanceerplatform/launchpad
- Lanceerbediening/launch controller(excl. batterij/excl. battery).
* Flicker Modelraket(E2X):
- Kunststof staartstuk met vinnen/plastic tail piece with fins.
- Kunststof neuskegel/plastic nose cone.
- Flicker self-stick decals.
- 38cm. parachute bijgeleverd/included.
- Snel-ontkoppel systeem voor de motor.
- Verven overbodig/No painting!

Starterset Journey is inclusief 3x Estes B6-4 USA raket motoren, 3x ontbranders en bergingswatten.
Starterset Journey includes 3x Estes B6-4 USA rocket motors, 3x igniters and recovery wadding.
De Journey Starterset | Reactie van: Modelraketten.NL op 09-12-17 12:00 | E-mail: info(at)modelraketten.nl
De Journey Starterset

Journey to outer space with the high flying Journey!

De Journey Starterset is een mooi pakket om met deze hobby te starten. In dit pakket zit het model, samen met een lanceerplatform en lanceerbediening van Estes.
Incl. 3 motoren, 3 ontbranders en bergingswatten.

Dit model is zeer eenvoudig te bouwen en te lanceren. Verven is overbodig!
Vluchten tot 330meter zijn mogelijk met een C6-5/7 motor.

Aantekening:
* E2X: Easy to Fix Journey modelraket, met staartstuk van kunststof(plastic lijm nodig/plastic glue needed).
* Compleet lanceersysteem/Complete launch system:
- Lanceerplatform/launchpad
- Lanceerbediening/launch controller(excl. batterij/excl. battery).
* Journey Modelraket(E2X):
- Kunststof staartstuk met vinnen/plastic tail piece with fins.
- Kunststof neuskegel/plastic nose cone.
- Journey self-stick decals.
- 30cm. parachute bijgeleverd/included.
- Snel-ontkoppel systeem voor de motor.
- Verven overbodig/No painting!

Starterset Journey is inclusief 3x Estes A8-3 USA raket motoren, 3x ontbranders en bergingswatten.
Starterset Journey includes 3x Estes A8-3 USA rocket motors, 3x igniters and recovery wadding.
De Whirlybird, Starterset | Reactie van: Modelraketten.NL op 09-12-17 12:01 | E-mail: info(at)modelraketten.nl
De Whirlybird, Starterset

What is black, hot pink and yellow you might ask? Well we would answer with the WHIRLYBIRD! With helicopter nose cone recovery along with parachute rocket recovery, the Whirlybird is really fun to watch launch and land!

Easy to build no matter what your experience level! Have this rocket on the launch pad in a quick afternoon and enjoy countless launches! And powered on a C6-5 engine, your Whirlybird can reach heights of 200 meters!

All rocket parts are pre-colored and glue quickly together with some tube type plastic cement.

De Flicker Starterset is een mooi pakket om met deze hobby te starten. In dit pakket zit het model, samen met een lanceerplatform en lanceerbediening van Estes.
Incl. 3 motoren, 3 ontbranders en bergingswatten.

Dit model is zeer eenvoudig te bouwen en te lanceren. Verven is overbodig!
Vluchten tot 195 meter zijn mogelijk met een C6-5 motor.

Aantekening:
* E2X: Easy to Fix Whirlybird modelraket, met staartstuk van kunststof(plastic lijm nodig/plastic glue needed).
* Compleet lanceersysteem/Complete launch system:
- Lanceerplatform/launchpad
- Lanceerbediening/launch controller(excl. batterij/excl. battery).
* Whirlybird Modelraket(E2X):
- Kunststof staartstuk met vinnen/plastic tail piece with fins.
- Kunststof neuskegel/plastic nose cone.
- Whirlybird self-stick decals.
- 30,5cm. parachute bijgeleverd/included.
- Snel-ontkoppel systeem voor de motor.
- Verven overbodig/No painting!

Starterset Whirlybird is inclusief 3x Estes C6-5 USA raket motoren, 3x ontbranders en bergingswatten.
Starterset Journey includes 3x Estes C6-5 USA rocket motors, 3x igniters and recovery wadding.
Dynastar Modellen | Reactie van: Modelraketten.NL op 09-01-19 13:27 | E-mail: info@modelraketten.nl
De Dynastar - LexxJet

This rocket model resembles a business jet that could be the future of luxury corporate travel in the not-so-distant future. It combines the fuel economy of turbofan jet engines, with the raw speed and power of rocket propulsion. It will quickly deliver its passengers to any part of the world in the shortest amount of time.
Model Gegevens:
Lengte: 724mm.
Diameter: 56mm.
Gewicht: 255gr.
Dynastar Modellen | Reactie van: Modelraketten.NL op 09-01-19 13:32 | E-mail: info@modelraketten.nl
De Dynastar - Stonebreaker
Kit with GREAT looks and Impressive Size!

Someday in the future, an asteroid or comet may threaten the destruction of the earth. Your urgent mission is to smash the asteroid to bits with the defender missile called the Stonebreaker.

You will find that the Stonebreaker is more than capable of completing this important mission. But to be safe, you might want to launch two or three of them — just to make sure.

The sleek design and minimum-drag nose cone allow this rocket to achieve fantastic altitudes on inexpensive rocket motors. Or you can put in an F24 motor, and watch it go to hyper-warp speeds.

The new Stonebreaker is a model rocket that is easy to build. If you have built a model rocket before, you will have no problems building this Skill Level-2 kit. It is straightforward to assemble, and a breeze to decorate.

The body is painted white or a light gray, and the tip of the nose is painted black. All the other decoration is done by applying the colorful self-adhesive decals.

Clusteren? Gebruik:
Centreerring56,3-2x24 (CR2x24_BTE70-mdf), 2x

Model Gegevens:
Lengte: 724mm.
Diameter: 56mm.
Gewicht: 139gr.
Nieuw: Javelin Starterset | Reactie van: Modelraketten.NL op 19-04-19 13:38 | E-mail: info@modelraketten.nl
De Javelin Starterset, met glider

De Javelin Starterset is een mooi pakket om met deze hobby te starten. In dit pakket zit het model, samen met een lanceerplatform en lanceerbediening van Estes.
Incl. 3 motoren, 3 ontbranders en bergingswatten.

Dit model is zeer eenvoudig te bouwen en te lanceren. Verven is overbodig!

Join the thousands of people wanting a really cool quick building rocket! E2X (Easy to Assemble/Fix) is a rocket series designed with beginners in mind. With all pre-colored rocket parts and easily applied self-stick decals, you’re ready for liftoff in minutes. With nothing more needed than tube type plastic cement for this launch set, you can be on the flying field in no time at all! Using standard Estes engines (sold separately) the Javelin soars to heights of 180m. but the REALLY cool part is the glider that takes off from the rocket.
Estes Little Joe-I | Reactie van: Modelraketten.NL op 31-05-19 11:14 | E-mail: info@modelraketten.nl
Little Joe 1
The Little Joe booster was the first rocket designed solely for manned spacecraft qualifications and to measure critical parameters at higher altitudes. The Estes 1/34th scale Little Joe stands almost 45cm tall and launches to 120m on a C6-5 engine. Other features include a plastic Mercury capsule and engine nozzles, precision laser cut balsa and printed card-stock fins, high quality waterslide decals and a colorful 38cm parachute for safe reentry. The Little Joe 1 will soon be in stock for an exciting holiday gift that every Rocketeer will want to build and proudly display.

Little Joe 1
De Little Joe-booster was de eerste raket die uitsluitend ontworpen was voor bemande ruimtevaartkwalificaties en om kritische parameters op grotere hoogten te meten. De Estes 1/34e schaal Little Joe is bijna 45cm lang en wordt gelanceerd tot 120m op een C6-5-motor. Andere kenmerken zijn een Mercury-capsule van kunststof en engine nozzles, precisie-laser gesneden balsa en geprinte vinnen van karton, waterslide decals van hoge kwaliteit en een kleurrijke 38cm parachute voor veilige terugkeer. De Little Joe 1 zal binnenkort op voorraad zijn voor een spannend vakantiecadeau die elke Rocketeer wil bouwen en met trots laat zien.
Emerald Streak (E2X) | Reactie van: Modelraketten.NL op 05-07-19 20:34 | E-mail: info@modelraketten.nl
Emerald Streak (E2X)
Easy to see in the sky and 56cm tall. Standard engine powered with a bright parachute for recovery. Being E2X assembly just makes this kit that much more fun!
With a 3-D coloured body tube part.

Aantekening:
* Kunststof vinnen/Plastic fins.
* 3 fin design.
* Plastic parts.
* Self stick Decals.
* White plastic Nose Cone.
* 30.5 cm. Parachute Recovery.
* Projected Altitude: 280m.
Black Brant III | Reactie van: Modelraketten.NL op 05-07-19 20:35 | E-mail: info@modelraketten.nl
Black Brant III
1/10th Scale Sounding Rocket. A great addition to your scale rocket collection.

Aantekening:
* Laser cut Wood Fins
* Waterslide Decals
* 30.5 cm Parachute Recovery
*- Projected Max Altitude: 396 m.
CR-Circuit Breaker | Reactie van: Modelraketten.NL op 05-07-19 20:36 | E-mail: info@modelraketten.nl
CR-Circuit Breaker
Two feet long!
Awesome demonstration rocket.
Features plastic nose cone and reducer. Pre-cut balsa fins, and 45cm parachute recovery.

Includes large pressure-sensitive decal sheet and quick-release engine mount.
Flights over 250m. are possible with a C6-7 motor.

Aantekening:
* Kunststof zwarte neuskegel en een wit verloopstuk(3D geprint)/Plastic black nose cone and a white conical shoulder(3D printed).
* Zwarte rompbuis is voorgekleurd/Black body tube is precoloured.
* Balsahouten vinnen, lasergesneden/Balsa fins, laser cut.
* Zwart-rode/Black-red plastic parachute, 45cm.
* Snelontkoppelclip voor vlot verwisselen van de motor.
* 4-kleurige stickerset, zelfklevend/4 colours sticker set, self adhesive.
CR-Drone Killer (semi scale) | Reactie van: Modelraketten.NL op 05-07-19 20:36 | E-mail: info@modelraketten.nl
CR-Drone Killer (semi scale)
Scale-like, surveillance drone missile removes threat of opposing side snooping on military installations.

Makes a great display kit with unique 3D printed plastic cone and reducer.
Features laser-cut balsa fins, and 30cm parachute recovery, detailed decals and quick-release engine mount.
Flies about 250m.

Aantekening:
* Kunststof neuskegel en verloop, 3D geprint/Plastic nose cone and conical shoulder, 3D printed.
* Balsahouten vinnen, lasergesneden/Balsa fins, laser cut.
* Zwart-gele/Black-yellow plastic parachute, 30cm.
* Snelontkoppelclip voor vlot verwisselen van de motor.
* Uitgebreide stickerset, zelfklevend/Extensive sticker set, self adhesive.
CR-Orbit | Reactie van: Modelraketten.NL op 05-07-19 20:38 | E-mail: info@modelraketten.nl
CR-Orbit
Payload kit!
Large clear payload section for small items or insects. Features plastic nose cone, laser-cut balsa fins, and 30cm parachute recovery. Includes pressure-sensitive decals. Flights of over 300m. are possible.

Aantekening:
* Kunststof neuskegel(Injection-molded plastic) en verloop(3D geprint)/Plastic nose cone(Injection-molded plastic) and conical shoulder(3D printed).
* Balsahouten vinnen, lasergesneden/Balsa fins, laser cut.
* Zwart-gele/Black-yellow plastic parachute, 30cm.
* Large clear payload section(red coloured).
* Zelfklevende stickerset/Self adhesive sticker set.
SA-2061 Sasha (scale like) | Reactie van: Modelraketten.NL op 30-09-19 12:17 | E-mail: info(at)modelraketten.nl
A long-time hobbyists dream build, this high flying booster model rocket kit is what Estes model rocketry is all about. Based off of a Russian military spaceship, the Sasha is a scale-like model that would be a spectacular addition to any hobby rocket collection.

Durable and rugged, this bad boy has two stages to lift the 173 gramm rocket into outer space. Powered by two D or E engines, the Sasha can soar to 700m high. An 46cm parachute will safely return the main rocket down to earth as the booster tumbles gently down to the ground. Once grounded, this 80cm tall rocket will command respect when on display in any hobbyists collection.
Aantekening:
This kit is challenging, yet straightforward to build. This is a great addition to any scale model collection.

* 12 vinnen/12 fins.
* Waterslide decals.
* Mooie raket uitlaat/Nice rocket nozzle.
LocP AGM-84 SLAM HARPOON | Reactie van: Modelraketten.NL op 05-11-19 05:06 | E-mail: info@modelraketten.nl
De LocP AGM-84 SLAM HARPOON (TWT-HARP26)
66mm-HW variation of an AGM-84 Harpoon missile. Sporting the new Modular Motor Can for the widest variety of motor configurations.

Stock with 3x24mm motor tubes (C/D) it can easily be switched out for any of the available combinations. Using removable rivets you can switch out the configuration at any time.

The cans are cross compatible with any other 66mm MMC(Motor Mount Can) style kits.

Nylon Parachute Recovery.

Aantekening:
* Diameter: 2,63 inch ~ 66mm-HW.(HW=Heavy Wall)
* 3x24mm motor mount can, removable.
* If you don’t want to keep it removable, simply glue the can in for a permanent solution.
* Vinnen 12x, berken triplex/Fins 12x, birch plywood.
* Plastic nose cone, polypropolene.
* Nylon parachute, ripstop and swivel.
* Fire protection blanket.
* Vinyl decal set is included in the kit.
* Pre-slotted airframe.
* Kevlar shock cord mount, elastic shock cord.
* Recovery swivel, 6.4mm launch lugs.
LocP AIM-54C Phoenix | Reactie van: Modelraketten.NL op 05-11-19 05:07 | E-mail: info@modelraketten.nl
De LocP AIM-54C Phoenix (TWT Phoenix)
66mm-HW variation of the notorious AIM-54C Phoenix missile. Sporting the new Modular Motor Can for the widest variety of motor configurations.

Stock with 4x18mm motor tubes (A-D) it can easily be switched out for any of the available combinations. Using removable rivets you can switch out the configuration at any time.

The cans are cross compatible with any other 66mm MMC(Motor Mount Can) style kits.

Nylon Parachute Recovery.

Aantekening:
* Diameter: 2,63 inch ~ 66mm-HW.(HW=Heavy Wall)
* 4x18mm motor mount can, removable.
* If you don’t want to keep it removable, simply glue the can in for a permanent solution.
* Vinnen 8x, berken triplex/Fins 8x, birch plywood.
* Plastic nose cone, polypropolene.
* Nylon parachute, ripstop and swivel.
* Fire protection blanket.
* Vinyl decal set is included in the kit.
* Pre-slotted airframe.
* Kevlar shock cord mount, elastic shock cord.
* Recovery swivel, 6.4mm launch lugs.
KM - Exa | Reactie van: Modelraketten.NL op 27-02-20 17:44 | E-mail: info(at)modelraketten.nl
De Exa

De buitenste schil bestaat uit diepgetrokken plastic onderdelen, die in combinatie met de centreerringen en de binnenbuis resulteren in een stabiele romp.
Hetzelfde geldt voor de geprofileerde vinnen, waarvan de constructiehulpmiddelen zorgen voor een exacte pasvorm tijdens de montage.

Aantekening:
* 5-6mm lanceernaald / launch rod.
* Met / With Baffle.
* Plastic modelvorm met binnenbuis 50 mm/Plastic model form with inner tube 50mm.
* Zelfklevende stickers/Selfsticking Decals.
* Parachute berging/recovery, nylon 55cm.

Lengte: 610 mm.
Diameter: 78 mm.
Gewicht: 250 gr.
Estes Der Red Max | Reactie van: Modelraketten.NL op 08-06-21 11:52 | E-mail: info(at)modelraketten.nl
De -Der Red Max- modelraket is weer verkrijgbaar.
Dit is het 42mm model van Estes.
Saturn-1B scale-model | Reactie van: Modelraketten.NL op 24-07-21 11:34 | E-mail: info(at)modelraketten.nl
De Estes Saturn-1B scale-model is here!

De machtige Saturnus-1B mag natuurlijk niet ontbreken in het assortiment van de échte raket modelbouwer! 68cm lengte met een doorsnede van 67mm. Het model is een Estes schaal 1:100 van het origineel. Bouw deze machtige Saturnus-1B en lanceer hem bijvoorbeeld op een D12-3 motor.

Een echt modelbouw pakket voor de bouwers die de kunst goed in de vingers hebben. Het pakket laat vooral zien wat de bouwer ervan maakt, want hier valt wel wat aan te bouwen.
Indicator Model Rocket | Reactie van: Modelraketten.NL op 24-07-21 11:35 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U
Indicator

De Indicator Flying Model Rocket Kit.
A great addition to any rocket collection!
A simple build. Powered by mini engines.
Can reach heights of up to 60 meters.
Two piece fins.

Spec Data
Recommended Motor A3-4T, A10-3T
Projected Altitude 400 Feet
Skill level 3
Weight 37g
Recovery Method 22.9 cm Parachute
Diameter 25mm
Length 528mm
Saturn V Skylab Model Rocket | Reactie van: Modelraketten.NL op 29-09-21 10:51 | E-mail: info(at)modelraketten.nl
The Estes Saturn V Skylab is an accurate 1:100 scale reproduction of this historic rocket and its space station payload. Vacuum formed tube wraps and fin fairings add a textured realism to this models surface. Injection molded fins are both durable and detailed - a fin alignment guide is included for precise placement. The detailed water-slide decals accurately represent the markings of this historic mission. Before flight, remove the realistic engine nozzle assembly and prep for launch. The Estes Saturn V Skylab can reach up to 400 feet on an Estes F15-4 engine. At ejection, the rocket separates into two sections for recovery - the Saturn V first and second stages return together under dual 24-inch parachutes, while the Skylab upper section sports its own 18-inch canopy. With impressive E-engine launches and multi-segment, multi-parachute recoveries, the Estes Saturn V Skylab will stand out in any model rocket fleet!
Antar Model Rocket | Reactie van: Modelraketten.NL op 29-09-21 10:52 | E-mail: info(at)modelraketten.nl
Harry Stine is known as the Father of Model Rocketry and founder of the National Association of Rocketry. One of the original pioneers that founded the hobby right alongside Vern Estes, Stine was also a talented writer. This Estes Designer Signature Series kit is a faithful reproduction crafted by Estes designers from many sketches Stine created as well as the actual original model which is from the personal collection of Estes Vice President Bill Stine (who happens to be Harry his son). Antar was not designed as a flying model rocket because in 1951 the hobby did not exist yet! Stine was a physicist and clearly understood the science of flight, so even though Antar was a fictional vehicle, the science behind it meant it could actually be stable in flight.
589x42mm.
Solo Model Rocket | Reactie van: Modelraketten.NL op 29-09-21 10:54 | E-mail: info(at)modelraketten.nl
When you launch our Solo rocket, you will have two vehicles to recover! The rocket will gently descend when the brightly colored 15inch parachute is deployed. Then, watch for the unique Glider Ring to deploy and glide back to your launch site in a circular glide path. Better have 2 people with you when you launch the Solo, it is twice the fun of a regular rocket!
* Easy to build.
* Plastic nose cone, fins, Glider Ring.
Astrocam model rocket | Reactie van: Modelraketten.NL op 14-04-22 18:01 | E-mail: info(at)modelraketten.nl
N E W / N I E U W / N E U
Astrocam

Ever wonder what the view is like from 900 feet high? Well, wonder no more! The Estes Astrocam flying model rocket allows you to to capture audio and video from a rocket in flight. The Estes Astrocam is a marvel of rocketry design combined with twenty-first century electronic miniaturization. It comes equipped with its own high-definition digital video camera and a specially engineered nosecone to house the camera during flight. The video footage is so clear and realistic, it is almost like being there!

* Digital video camera.
* Plastic vinnen, neuskegel, staartstuk/ fins, nose cone, tail piece.
* Zelf plakkende gekleurde sticker/Self stick coloured decal.
* Parachute berging/recovery.

Naar boven
 
Voeg je reactie toe
Uw naam: (max. 30 tekens) *
E-mail: (max. 30 tekens) *
Titel: (max. 30 tekens) *
* = Verplichte velden
Tip: Schrijf bij ‹E-mail› de "@" als "(at)"

Bericht: (HTML niet toegestaan, geen quotes ( ' , " ) gebruiken)


Lees je tekst vóór het toevoegen nog even goed door!
Breng, zo nodig, wijzigingen aan vóórdat je op onderstaande knop klikt.